Schöne für Ihre inspiration und informationszwecken bezüglich der erhebung Aukru HC-06 Drahtlose 4 Pins Bluetooth RF Transceiver Serial Modul mit 4 set kabel für Arduino exklusive updates. Sie können detailinformationen zu diesem produkt unten lesen.
Beschreibung:
4.the interface level is 3.3V, you can directly connect a variety of SCM(51, AVR, PIC, ARM,MSP430 etc. ), 5V microcontroller can also be connected, not through without MAX232! 5.open to 10m effective distance of over 10m are possible, but don’t make this connection to ensure the quality of distance 6. after the pair when using full-duplex serial port,without having to know any Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format,not support other formats. 7. establish a Bluetooth connection when not support setting the baud rate , the name , the pairing password via AT commands , parameter set -down to save . After Bluetooth connection is automatically switched to transparent mode.
8. small size (3.57cm * 1.52cm), chip production plant to ensure the quality of the patch . And set transparent shrink tube , dust and beautiful, and there is some anti-static capabilities.
Produktdetails:
HC-06 Drahtlose Bluetooth Modul
Ermöglicht Ihrem Gerät sowohl senden als auch empfangen die TTL-Daten via Bluetooth-Technologie ohne ein serielles Kabel an Ihren Computer
Kompatibel mit allen USB-Bluetooth-Adapter
eingebaute Antenne
Bluetooth version: V2.0+EDR
Betriebsspannung: 3.3V
Größe: 4.3 * 1.6 * 0.7cm
Mit LED-Anzeige, verwenden 150mA und 3.3V Regulierung Chip Farbe: wie Bild gezegt. Details und Design werden auf dem Bildern angezeigt
(Achtung: BITTE BEACHTEN Sie, dass aufgrund Lichteffekte, Monitor-Helligkeit / Kontrast-Einstellungen usw, es könnte einige geringfügige Unterschiede in den Farbton der Bilder und der tatsächlichen Position sein!)
Lieferumfang:
1 x HC-06 Drahtlose Bluetooth Modul
1x dupont kable.
pay your attention on this : Please do not connect the power supply with the signal pin directly,or it will result in broken the module
Arduino-compatible;Hinweis: Diese ist nicht original Arduino product.it ist nur ein Ersatz-Zubehör aus aukru.
Funktionen:
- TXD: the sending end , generally expressed as their transmitter, normal communication must be connected to RXD another device .
- RXD: the receiving end, generally expressed as their receiving end, the normal communication TXD must be connected to another device. Itself when normal communication TXD RXD devices connected forever !
- Collected spontaneously : RXD when normal communication to other devices connected TXD, so if you want to receive data transmitted by its own name suggests , it is their own to receive data transmitted , which is directly connected to its own TXD RXD, used to send and receive test itself is normal, is the quickest and easiest test method, when a problem first do the test to determine whether a product failure. Also known as the loopback test .
- 1. the core module using the HC-06, interface includes VCC, GND,TXD,RXD, aside LED status output pin, the microcontroller can be connected via Bluetooth to determine whether the pin state, KEY pin of the slave invalid 2. led indicate Bluetooth connection status, flashes to indicate there is no Bluetooth connection, Steady Bluetooth port is connected and turned on 3.bottom 3.3V LDO, the input voltage 3.6~6V, when unpaired current of 30mA, the pairing of 10mA, the input voltage must not exceed 7V!
- 4.the interface level is 3.3V, you can directly connect a variety of SCM(51, AVR, PIC, ARM,MSP430 etc. ), 5V microcontroller can also be connected, not through without MAX232! 5.open to 10m effective distance of over 10m are possible, but don’t make this connection to ensure the quality of distance 6. after the pair when using full-duplex serial port,without having to know any Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format,not support other formats.
Danke fürs Lesen Aukru HC-06 Drahtlose 4 Pins Bluetooth RF Transceiver Serial Modul mit 4 set kabel für Arduino.
